Building A Trap - Part 2

This is the second part in a series called Building A Trap.

Using the 4 foot by 2 foot section of mesh begin measuring out and cutting the individual pieces listed below:

---

Piece A
10 inches by 14 inches

Cut mesh to match image - 2 inch by 2 inch cutout

Quantity: 1

---

Piece B
10 inches by 14 inches

Cut mesh to match image - 7 inch by 8 inch cutout

Quantity: 1

---

Piece C
8 inches by 8.5 inches

Cut mesh to match image - cut off last half inch

Quantity: 1

---

Piece D
6 inches by 6 inches

Cut mesh to match image - cut off 2 inch by 2 inch sections on each corner

Quantity: 1

---

Piece E
10 inches by 4 inches

Cut mesh to match image

Quantity: 2

---

Piece F
2 inches by 2 inches

Quantity: 1

---

Piece G
4 inches by 10 inches

Cut mesh to match image - cut off last wire at 4 inch mark

Quantity: 2

---

Piece H
2.5 inches by 9 inches

Cut mesh to match image - cut off last wire at 2.5 inch mark

Quantity: 2

---

Piece I
6.5 inches by 14 inches

Quantity: 2

---

In part 3 we will begin assembling our trap.